#Sfp media converter how to
#Sfp media converter install

Confirm that the PoE media converter you want supports these standards or there may be some compatibility problems. Standards: Generally PoE media converter are IEEE802.3af, IEEE802.3at, or IEEE802.3bt compliant.

#Sfp media converter install

Therefore you should check the operating temperature with your media converter provider about whether you can install them in extreme environments. Remember to check the operating temperature of the media converter to see if it can operate under extended temperature (generally from -40 ☌ to 75 ☌). Operating temperature: It should be noted especially when you need an industrial PoE media converter. So make sure whether the PoE media converter supports either full duplex or half duplex or supports both of full duplex and half duplex. Single mode or multimode: According to the transmission media, the PoE media converter can be divided into single mode converter and multimode converter, which will affect the transmission distance and the fiber optic transceivers/fiber patch cables that can be used.ĭuplex mode: As some PoE media converters can only be used as full duplex but not half duplex, packet loss may occur when it is connected with the switch or hub that supports half duplex. Port number and port type: In most cases, a PoE media converter features one fiber port and one RJ45 port, but there are still some PoE fiber to Ethernet converters that have multiple ports such as one or two fiber ports and four RJ45 ports. There are 10M, 100M, 1000M, 10/100M, and 10/100/1000M PoE media converters in the market which can be chosen as you need.

#Sfp media converter how to

How to choose the best PoE media converter that suits your network requirement? There are some points you should consider.ĭata rate: The data rate of the PoE media converter is the first thing that should be considered. How to Select the Right PoE Media Converter? The video below will help you to get a better understanding of how to use a PoE fiber to Ethernet converter.

Step 3: Connect the RJ45 ports of the PoE media converter and the IP camera using a UTP Ethernet cable. Step 2: Connect a fiber optic cable to the SFP module on the PoE media converter and the other end of the cable into the switch. The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Step 1: Insert an SFP module into the fiber port of the PoE media converter and an SFP module into the SFP port of the switch. Here we take fiber to IP cameras as an example to show the application of a PoE media converter.īefore starting the deployment process, make sure you have access to the following devices: a Gigabit fiber switch, a 10/100/1000M PoE media converter, an IP camera, an Ethernet network cable (like Cat5e/Cat6), a fiber patch cable (like OS2/OM4), and two SFP fiber optic transceivers. There are three main applications of PoE media converters: fiber to IP cameras, fiber to wireless access points, and fiber to the desktop.